Experimental and numerical investigation of losses in low-pressure turbine blade rows /

Experimental and numerical investigation of losses in low-pressure turbine blade rows /

Saved in:

Bibliographic Details
Main Author:	Dorney, Daniel J. (Author)
Format:	Government Document Electronic eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, January 2000.
Series:	NASA technical memorandum ; 2000-209910.
Subjects:	Turbine blades. Losses. Aircraft wakes. Low pressure. Turbomachinery.
Online Access:	CONNECT

Similar Items

On the physics of flow separation along a low pressure turbine blade under unsteady flow conditions /
by: Schobeiri, Meinhard, et al.
Published: (2003)

Low pressure turbine test hardware detailed design report /
by: Cherry, D. G., et al.
Published: (1982)

The effect of wake passing on turbine blade film cooling /
by: Heidmann, James D.
Published: (1996)

Applying pressure sensitive paint technology to rotor blades /
by: Watkins, A. Neal
Published: (2014)

Computational investigation of novel tip leakage mitigation methods for high pressure turbine blades /
by: Ibrahim , Mounir, et al.
Published: (2014)

Comprehensive structural dynamic analysis of the SSME/AT fuel pump first-stage turbine blade /
by: Brown, A. M.
Published: (1998)

Experimental studies of low-pressure turbine flows and flow control : final report /
by: Volino, Ralph John
Published: (2012)

An experimental study of the effect of wake passing on turbine blade film cooling /
by: Heidmann, James D., et al.
Published: (1997)

Blade heat transfer measurements and predictions in a transonic turbine cascade /
by: Giel, P. W.
Published: (1999)

High pressure turbine test hardware detailed design report /
by: Halila, E. E., et al.
Published: (1982)

Hover validation and acoustic baseline blade set definition /
by: Overmeyer, Austin D., et al.
Published: (2020)

Integrated turbine tip clearance and gas turbine engine simulation /
by: Chapman, Jeffryes W.
Published: (2016)

Cold-air investigation of first state of 4 1/2-stage, fan-drive turbine with average stage-loading factor of 4.66 /
by: Whitney, Warren J., et al.
Published: (1981)

Experimental performance evaluation of a 4.59-inch radial-inflow turbine with and without splitter blades /
by: Futral, Samuel M., et al.
Published: (1970)

Flow control under low-pressure turbine conditions using pulsed jets : final report /
by: Volino, Ralph John, et al.
Published: (2012)

BladeCAD : an interactive geometric design tool for turbomachinery blades /
by: Miller, Perry L.
Published: (1996)

Simplified cyclic structural analyses of SSME turbine blades /
by: Kaufman, Albert, 1928-, et al.
Published: (1986)

Implementation of a transition model in a NASA code and validation using heat transfer data on a turbine blade /
by: Ameri, Ali A.
Published: (2012)

Experimental performance and analysis of 15.04-centimeter-tip-diameter, radial-inflow turbine with work factor of 1.126 and thick blading /
by: McLallin, Kerry L., et al.
Published: (1980)

Design concepts for cooled ceramic composite turbine vane /
by: Boyle, Robert J., et al.
Published: (2015)

Simulation of VSPT experimental cascade under high and low free-stream turbulence conditions /
by: Ameri, Ali A., et al.
Published: (2015)

Determination of HART I blade structural properties by laboratory testing /
by: Jung, Sung N., et al.
Published: (2012)

Understanding and mitigating tip leakage and endwall losses in high pressure ratio cores /
by: Christophel, Jesse
Published: (2015)

Analysis of turbine blade relative cooling flow factor used in the subroutine coolit based on film cooling correlations /
by: Schneider, Steven J., et al.
Published: (2015)

High pressure turbine ceramic shroud support technology report /
by: Nelson, W. A., et al.
Published: (1982)

Off-design performance loss model for radial turbines with pivoting, variable-area stators /
by: Meitner, Peter L., et al.
Published: (1980)

Turbine engine clearance control systems : current practices and future directions /
by: Lattime, Scott B., et al.
Published: (2002)

Fuel injector patternation evaluation in advanced liquid-fueled, high pressure, gas turbine combustors, using nonintrusive optical diagnostic techniques /
by: Locke, R. J.
Published: (1998)

Experimental study of boundary layer behavior in a simulated low pressure turbine /
by: Shyne, Rickey J.
Published: (1998)

Modern experimental techniques in turbine engine testing /
by: Lepicovsky, Jan
Published: (1996)

An approach to detect and mitigate ice particle accretion in aircraft engine compression systems /
by: May, Ryan D., et al.
Published: (2013)

Current Lewis turbomachinery research : building on our legacy of excellence /
by: Povinelli, Louis A.
Published: (1997)

Endwall heat transfer measurements in a transonic turbine cascade /
by: Giel, P. W.
Published: (1996)

Gust response analysis of a turbine cascade /
by: Gorla, Rama S. R.
Published: (2001)

Axial-flow turbine rotor discharge-flow overexpansion and limit-loading condition.
by: Chen, Shu-Cheng S.
Published: (2017)

An experimental investigation of the flow physics associated with end wall losses and large rotor tip clearances as found in the rear stages of a high pressure compressor /
by: Berdanier, Reid A., et al.
Published: (2015)

Three-dimensional flow field measurements in a transonic turbine cascade /
by: Giel, P. W.
Published: (1996)

Aerodynamic investigation of incidence angle effects in a large scale transonic turbine cascade /
by: McVetta, Ashlie B., et al.
Published: (2013)

Acoustics of future low-emissions combustor technology : volume 1: final report /
by: McCormick, Duane
Published: (2020)

Computational work to support FAP/SRW variable-speed power-turbine development /
by: Ameri, Ali A.
Published: (2012)