An investigation of surge in a high-speed centrifugal compressor using digital PIV /

An investigation of surge in a high-speed centrifugal compressor using digital PIV /

Saved in:

Bibliographic Details
Main Authors:	Wernet, Mark P. (Author), Bright, Michelle M. (Author), Skoch, Gary J. (Author)
Format:	Government Document Electronic eBook
Language:	English
Published:	Cleveland Ohio : National Aeronautics and Space Administration, Glenn Research Center, December 2002.
Series:	NASA technical memorandum ; 2002-211832.
Subjects:	Dynamic pressure. Particle image velocimetry. Pressure measurement. Rotating stalls. Transient pressures.
Online Access:	CONNECT

Similar Items

Dimension determination of precursive stall events in a single stage high speed compressor /
by: Bright, Michelle M., et al.
Published: (1996)

Dynamic modeling of starting aerodynamics and stage matching in an axi-centrifugal compressor /
by: Wilkes, Kevin, et al.
Published: (1996)

PIV and rotational raman-based temperature measurements for CFD validation of a perforated plate cooling flow : part 1 /
by: Wernet, Mark P.
Published: (2020)

PIV and rotational Raman-based temperature measures for CFD validation in a single injector cooling flow /
by: Wernet, Mark P., et al.
Published: (2018)

Characterization of Chevron nozzle performance /
by: Wernet, Mark P., et al.
Published: (2021)

On hammershock propagation in a supersonic flow field /
by: Porro, A. Robert
Published: (2002)

Comparisons of rig and engine dynamic events in the compressor of an axi-centrifugal turboshaft engine /
by: Owen, A. Karl, et al.
Published: (1996)

Experimental verification of buffet calculation procedure using unsteady PSP /
by: Panda, J.
Published: (2016)

Dynamic simulation of a wave rotor topped turboshaft engine /
by: Greendyke, Robert B., et al.
Published: (1997)

Experimental investigation of aeroelastic deformation of slender wings at supersonic speeds using a video model deformation measurement technique /
by: Erickson, Gary E.
Published: (2013)

Evaluation of data-logging transducer to passively collect pressure vessel p/T history /
by: Wnuk, Stephen P., et al.
Published: (2013)

Characterization of three-stream jet flow fields /
by: Henderson, Brenda S., et al.
Published: (2016)

Reliability of COPVs accounting for margin of safety on design burst /
by: Murthy, P. L. N.
Published: (2012)

Static feed water electrolysis subsystem testing and component division : final report /
by: Koszenski, E. P., et al.
Published: (1983)

Experimental results for temporally overlapping pulses from Quantel EverGreen 200 laser /
by: Watkins, A. Neal, et al.
Published: (2013)

Flame propagation and extinction in particle clouds /
by: Berlad, A. L., et al.
Published: (1986)

Thermodynamic measurements using the Knudsen cell technique /
by: Jacobson, Nathan S., et al.
Published: (2020)

Wave augmented diffusers for centrifugal compressors /
by: Paxson, Daniel E., et al.
Published: (1998)

Orifice mass flow calculation in NASA's W-8 single stage axial compressor facility /
by: Bozak, Richard F.
Published: (2018)

Comparison of the isothermal oxidation behavior of as-cast Cu-17%Cr and Cu-17%Cr-5%A1.
by: Raj, Sai V.
Published: (2008)

Interface tests for evaluating ability of pressure-suited subjects to perform lunar scientific tasks /
by: LaFevers, Earl V.
Published: (1965)

Fuel injector patternation evaluation in advanced liquid-fueled, high pressure, gas turbine combustors, using nonintrusive optical diagnostic techniques /
by: Locke, R. J.
Published: (1998)

Vandenberg Air Force Base pressure gradient wind study /
by: Shafer, Jaclyn A.
Published: (2013)

Acoustic database for turbofan engine core-noise sources, volume I, final report /
by: Gordon, Grant
Published: (2015)

Upper body venous compliance exceeds lower body venous compliance in humans /
by: Watenpaugh, Donald E.
Published: (1996)

Fuel flexible combustor for high-OPR compact-core N+3 propulsion engine : final technical report /
by: Smith, Lance L.
Published: (2020)

Mir cooperative solar array flight performance data and computational analysis /
by: Kerslake, Thomas W., et al.
Published: (1997)

Bidirectional brush seals : post-test analysis /
by: Hendricks, Robert C.
Published: (1997)

Development, verification and use of gust modeling in the NASA computational fluid dynamics code FUN3D /
by: Bartels, Robert E.
Published: (2012)

Aeroelastic analyses of the SemiSpan Supersonic Transport (S⁴T) wind tunnel model at Mach 0.95 /
by: Hur, Jiyoung
Published: (2014)

The effect of air preheat at atmospheric pressure on the formation of NO[subscript x] in the quick-mix section of an axially staged combustor /
by: Vardakas, M. A.
Published: (1999)

Acoustic measurements of an uninstalled spacecraft cabin ventilation fan prototype /
by: Koch, L. Danielle
Published: (2012)

Liquid oxygen thermodynamic vent system testing with helium pressurization /
by: Van Dresar, Neil T.
Published: (2014)

An investigation of the causes of failure of flexible thermal protection materials in an aerodynamic environment /
by: Coe, Charles F.
Published: (1987)

Small scale mass flow plug calibration /
by: Sasson, Jonathan
Published: (2015)

Glenn Extreme Environments Rig (GEER) independent review /
by: Jankovsky, Robert S.
Published: (2015)

An automated program for reinforcement requirements for openings in cylindrical pressure vessels /
by: Wilson, John F., et al.
Published: (1975)

Methods of measuring vapor pressures of lubricants with their additives using TGA and/or microbalances /
by: Scialdone, John J., et al.
Published: (1996)

Conversion of cardiac performance data in analog form for digital computer entry /
by: Miller, Robert L.
Published: (1972)

Experimental pressure distributions on a 120° cone at Mach numbers from 2.96 to 4.63 and angles of attack from 0° to 20° /
by: Stallings, Robert L., et al.
Published: (1969)