Thermal management techniques for oil-free turbomachinery systems /

Thermal management techniques for oil-free turbomachinery systems /

Saved in:

Bibliographic Details
Main Authors:	Radil, Kevin C. (Author), DellaCorte, Christopher (Author), Zeszotek, Michelle (Author)
Format:	Government Document Electronic eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, October 2006.
Series:	NASA technical memorandum ; 2006-214358.
Subjects:	American Society of Lubrication Engineers. Mechanical engineering. Turbomachinery. Gas bearings.
Online Access:	CONNECT

Similar Items

A systems approach to the solid lubrication of foil air bearings for oil-free turbomachinery /
by: DellaCorte, Christopher, et al.
Published: (2002)

The evaluation of a modified chrome oxide based high temperature solid lubricant coating for foil gas bearings /
by: DellaCorte, Christopher
Published: (1998)

A new foil air bearing test rig for use to 700ÀC and 70,000 rpm /
by: DellaCorte, Christopher
Published: (1997)

Performance of jet- and inner-ring-lubricated 35-millimeter-bore ball bearings operating to 2.5 million DN /
by: Schuller, Fredrick T., et al.
Published: (1981)

Aeroelastic stability computations for turbomachinery /
by: Srivastava, R.
Published: (2001)

The effect of compositional tailoring on the thermal expansion and tribological properties of PS300 : a solid lubricant composite coating /
by: DellaCorte, Christopher, et al.
Published: (1996)

Current Lewis turbomachinery research : building on our legacy of excellence /
by: Povinelli, Louis A.
Published: (1997)

Electrical modeling and thermal analysis toolbox (EMTAT) user's guide /
by: Bell, Mark E., et al.
Published: (2020)

The effect of ODC-free cleaning techniques on bearing lifetimes in the parched elastohydrodynamic regime /
by: Jones, William R.
Published: (1996)

Comparison between oil-mist and oil-jet lubrication of high-speed, small-bore, angular-contact ball bearings /
by: Pinel, Stanley I., et al.
Published: (2001)

Plasma actuators for turbomachinery flow control, final report /
by: Miles, Richard B. 1948-, et al.
Published: (2012)

BladeCAD : an interactive geometric design tool for turbomachinery blades /
by: Miller, Perry L.
Published: (1996)

Lifetimes of multiply alkylated cyclopentane oil in contact with various metals, evaluated with vacuum spiral orbit tribometer /
by: Pepper, Stephen V., 1937-
Published: (2018)

In-situ, on-demand lubrication system for space mechanisms /
by: Marchetti, Mario
Published: (2002)

Experimental study of load carrying capacity of point contacts at zero entrainment velocity /
by: Shogrin, Bradley
Published: (1998)

Acoustics of future low-emissions combustor technology : volume 1: final report /
by: McCormick, Duane
Published: (2020)

Effect of cage design on characteristics of high-speed-jet-lubricated 35-millimeter-bore ball bearing /
by: Schuller, Fredrick T., et al.
Published: (1980)

Tribological performance of PM400 bushings in oscillatory sliding from 25 to 927° C /
by: DellaCorte, Christopher, et al.
Published: (2019)

Tribological evaluation of candidate gear materials operating under light loads in highly humid conditions /
by: DellaCorte, Christopher, et al.
Published: (2015)

Tribological evaluation of PS300 : a new chrome oxide based solid lubricant coating sliding against A1₂0₃ from 25 to 650°C /
by: DellaCorte, Christopher, et al.
Published: (1996)

Tribological properties and thermal stability of various types of polyimide films /
by: Fusaro, Robert L.
Published: (1981)

60NiTi intermetallic material evaluation for lightweight and corrosion resistant spherical sliding bearings for aerospace applications : report on NASA-Kamatics SAA3-1288 /
by: DellaCorte, Christopher, et al.
Published: (2015)

Preload loss in a spacecraft fastener via vibration-induced unwinding /
by: DellaCorte, Christopher, et al.
Published: (2018)

Life of Pennzane and 815Z-lubricated instrument bearings cleaned with non-CFC solvents /
by: Loewenthal, Stuart H., et al.
Published: (1999)

Design and manufacturing considerations for shockproof and corrosion-immune superelastic nickel-titanium bearings for a space station application /
by: DellaCorte, Christopher, et al.
Published: (2012)

Potential application of NASA aerospace technology to ground-based power systems /
by: Povinelli, Louis A.
Published: (2000)

Hover validation and acoustic baseline blade set definition /
by: Overmeyer, Austin D., et al.
Published: (2020)

Dynamic response of film thickness in spiral-groove face seals /
by: DiRusso, Eliseo
Published: (1985)

Wave fluid film bearing tests for an aviation gearbox /
by: Dimofte, Florin
Published: (2000)

Ceramic thermal-barrier coatings for cooled turbines /
by: Liebert, Curt H., et al.
Published: (1976)

Computational investigation of novel tip leakage mitigation methods for high pressure turbine blades /
by: Ibrahim , Mounir, et al.
Published: (2014)

An experimental investigation of the flow physics associated with end wall losses and large rotor tip clearances as found in the rear stages of a high pressure compressor /
by: Berdanier, Reid A., et al.
Published: (2015)

Determination of HART I blade structural properties by laboratory testing /
by: Jung, Sung N., et al.
Published: (2012)

Tribology experiment in zero gravity /
by: Pan, C. H. T.
Published: (2015)

Enhancement of perfluoropolyether boundary lubrication performance /
by: Jones, W. R., et al.
Published: (1996)

Experimental and numerical investigation of losses in low-pressure turbine blade rows /
by: Dorney, Daniel J.
Published: (2000)

On the correlation of specific film thickness and gear pitting life /
by: Krantz, T. L.
Published: (2015)

Lubrication, friction, and wear.
Published: (1971)

Analysis of inlet-compressor acoustic interactions using coupled CFD codes /
by: Suresh, A. (Writer on numeric analysis)
Published: (1998)

Friction and wear characteristics of candidate foil bearing materials from 25 °C to 800 °C /
by: Laskowski, J. A., et al.
Published: (1996)